Category Archives: Electrical Distribution System

Substation Design Jobs

For the past few months, many people have been looking information how they can get that best substation design jobs. This is mainly from the already crowded market in terms of people seeking these jobs. The following are the best tips on how you can get the best substation design jobs;

First, you can get these tips from the computer consulting firms/professionals in your local area. I believe the firms/professionals have more than enough qualifications to give you that best tips on get that best substation design jobs. This idea will definitely assist you get that perfect job.

Alternatively, you can conduct an individual internet research to look for best jobs available. Always remember to ascertain the integrity of any given information before implementing. This will definitely leads to your success by getting a job offer.

I believe with the above-mentioned tips, this can one of the easy task to conduct or look for.

Construction Manual For Substation

Construction manual for substation is one of the documents that should be kept well. Remember throughout the construction process you will need to refer to the manual for you to accomplish different designs. You can easily miss out important designs if you fail in following the manual. As a good contractor you should produce copies of the manual and give out to different builders whom you are carrying out the construction work with. This is necessary for them to be able to refer in case you are absent.

Construction manual for substation should be kept well after finishing the construction process. This is necessary because it will be required in case of any major renovation in the substation in the future. You may decide to expand the substation for example and in this case you will require the manual so that the expansion design can be made to complement the already existing design.

Substation Design Guide

What is the best substation design guide? This question can be very frustrating if you do not that the right procedures on how to make this important step in the operations of a substation. The following is the best tips to know on the substation design guide;
First, allow for enough space during the process of designing the substation. This will ensure easy movement in as well as out of the station. it is also offers space during the times of maintenance by the experts or professionals.
Secondly, the substation should be located in those places where there is no regular movement of people. This ensures that no particular person becomes a victim of leakages of power from the substations.
Finally, it should be fenced to protect the entry of both wild animals as well as human beings. This not only protects these animals from entering the station but also saves the amount of money needed for repairs in cases of breakage.

Substation Automation Scada

In the current generation, information management has become a key component in every center may it be a production plant, institution or a business unit. This has led an increase in the need for highly efficient and integrated information management systems to ensure maximum output of the unit in question at the minimum cost possible. With this fact in mind, substation automation SCADA has become a very vital component in every unit that has a defined flow of data from one point to another to ensure that these needs are effectively met.

Ideally, substation automation SCADA ensures that the information is relayed in the most resource friendly and most secure way. This is attained through Supervisory Control and Data Acquisition via a wireless system, the Enhanced Messaging System. This creates a flow of data from the main network to the substations installed in the networking system used to transport data from one point to another. Supervisory Control and Data Acquisition system also helps in reducing data redundancy which has a significant positive impact on reliability and efficiency the entire network.

Electrical Substation Safety

Electrical substation is constructed on the ground level so the chances of accident is more. All safety and prevention measure are to be taken for the safety of the people as it is a very dangerous area with high electrical voltage. Some of the common substation safety measures are:

1) Restricted Access: Though the substation is usually surrounded by a tall fence with danger signs but some people may ignore the signs and enter inside, which is very dangerous. Parents should restrict their children playing near substations. Only an authorized person must enter the substation.

2) General safety and security: Electrician must be locked all the gates while working and leaving the substation. Any suspicious activity must be reported and usage of fire, alcohol, drugs and firearms must be avoided near or inside the substation.

3) Damage: Any damaged property must be repaired and informed immediately. The substation must be very clean and no thrash or food items are to be left inside or near the substation.

Substation Automation System

Automatic power controlling technology uses instruments and devices that generate a response to systems required through sensing. Substation Automation system on the other hand exclusively utilizes Intelligent electronic devices to execute it’s capabilities of generating and delivering power. In addition, the automation system monitors and controls power delivery through substation integration backbone. This way, no outages occur; and if they occur, the outage duration is greatly reduced. The whole system is about generating, transmitting and distributing power.

However, intelligent electronic devices are behind the substation automation system’s function. Automation task in such a system include data acquisitions, controlling or output devices, and communications devices within the system. Being a complex system that must work perfectly, Alstom Grid Automation Business Unit provides the materials for this system and ensures system’s grid stability and functionality. Power production has two options that include Ac and Dc control are electrical systems that use the same operation mechanism but are of different grades.